Home
About
Shop
Contact Us
Home
About
Shop
Contact Us
SALE
Share
Package Includes:
1 x 3/16" SAE Hand Nut Driver Wrench
1 x 1/4" SAE Hand Nut Driver Wrench
1 x 11/32" SAE Hand Nut Driver Wrench
Tool Makeup:
Steel construction, optimized for durability and long wear characteristics
Nickel Plated for durability and protection against oxidation or corrosion
Heat Treated to Last a lifetime (70+ Rockwell Hardness)
Nice deep tool head in order to get to a nut that is located on a long screw
Thin wall tool head in order to fit into those tight areas.
Laser Engraved with MIP Logo and Size of Nut driver
Color Coded Band to quickly distinguish one size from another.
Short tool length, as the ergonomics of using the tool are improved in this configuration.
Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions.
Every tool assembled by hand
Manufactured and packaged 100% in the USA
Related Products
1UP Racing Premium R/C Solder
This is a 12 Gram roll of 1UP Racing Premium R/C Solder. 1UP Premium R/C Solder is a custom blend created to be used with high strand count wire for the best connections possible. Premium R/C Solder is easy to work with but has been proven to perform in extreme conditions as well. Dries bright and shiny for the best possible look!
Motors ,
Store Front Page
$
6.99
Futaba R204GF-E S-FHSS High Voltage 4-Channel 2.4GHz Micro Receiver
The Futaba R204GF-E High Voltage 2.4GHz S-FHSS 4-Channel Micro Receiver is compatible with Futaba FHSS and S-FHSS transmitters. NOTE:The R204GF-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.Features:Ideally sized for 1/10 and 1/12 scale vehicles including rock crawlersCompatible with any Futaba S-FHSS/FHSS systemS-FHSS mode offers two operation modes: Normal and High Speed responsesInternal antennaSpecifications:Operating Voltage: 4.8 - 7.4VReceiving Range: 230' (70m)Battery Failsafe: 3.8VCurrent Drain: 30Ma (at no signal)Size: 1.38x0.91x0.35" (35.1x23.2x9mm)Weight: 0.21oz (6g) Number of Ports: 4PWM Output: 3SBUS Ports: 0SBUS2 Ports: 0FASST: NoTelemetry: NoS-FHSS: YesHigh Speed: YesHigh Voltage: YesConnector: J (STND)Range: Full Range
Radios / Receivers ,
Receivers ,
Store Front Page
$
58.99
Futaba R304SB-E (T-FHSS/S.Bus2)
DESCRIPTIONR304SB-E– T-FHSS Telemetry System 4-Channel Receiver(Indoor Optimized for smaller carpet track type cars where space is at a premium!)For EP Car Models (01102180-3)T-FHSSSIZE:35.1 mm x 23.2 mm x 12.5 mmWEIGHT:7.0 gRATED VOLTAGE:DC 4.8V-7.4VOPERATING VOLTAGE:DC 4.0V-8.4VNEVER USE THE R304SB-E IN GP CARSUSE OF ANALOG SERVOS MAY CAUSE SERVO TROUBLE
Radios / Receivers ,
Receivers ,
Store Front Page
$
69.99
SpryRC decal
Accessories ,
Store Front Page
$
0.50
MRT Mptx Transponder
Store Front Page
$
84.95
Tekno Droop Adj Screws M4x10mm
EB/ET48 ,
ET48 ,
Store Front Page
$
8.99
TKR7253 – Spur Gear (53t, 32 pitch, composite, black, EB/ET410)
Product DescriptionTKR7253 – Spur Gear (53t, 32 pitch, composite, black, EB/ET410)Vehicle CompatibilityTKR7253 - Spur Gear (53t, 32 pitch, composite, black, EB/ET410) is included with the ET410 and ET410.2 kits and can be used as a replacement part for those vehicles.This can be used with the EB410 vehicle and should be a direct replacement for the stock part or used as a new feature. Please use the instruction manual for the kit(s) listed to verify compatibility and no additional items are necessary before purchasing.
EB/ET410 & 410.2 ,
ET410 & 410.2 ,
Store Front Page
$
8.99
