Home
About
Shop
Contact Us
Home
About
Shop
Contact Us
SALE
Share
HobbyStar Brushless Motor Sensor Cable, 150mm
SKU
:
388-40-060
$ 3.99
Quantity
*
In Stock : 2
Added
Add To Cart
OUT OF STOCK
Brand
:
Hobby Star
150mm motor sensor cable by Hobby Star. Flexible and reliable.
Related Products
Futaba R204GF-E S-FHSS High Voltage 4-Channel 2.4GHz Micro Receiver
The Futaba R204GF-E High Voltage 2.4GHz S-FHSS 4-Channel Micro Receiver is compatible with Futaba FHSS and S-FHSS transmitters. NOTE:The R204GF-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.Features:Ideally sized for 1/10 and 1/12 scale vehicles including rock crawlersCompatible with any Futaba S-FHSS/FHSS systemS-FHSS mode offers two operation modes: Normal and High Speed responsesInternal antennaSpecifications:Operating Voltage: 4.8 - 7.4VReceiving Range: 230' (70m)Battery Failsafe: 3.8VCurrent Drain: 30Ma (at no signal)Size: 1.38x0.91x0.35" (35.1x23.2x9mm)Weight: 0.21oz (6g) Number of Ports: 4PWM Output: 3SBUS Ports: 0SBUS2 Ports: 0FASST: NoTelemetry: NoS-FHSS: YesHigh Speed: YesHigh Voltage: YesConnector: J (STND)Range: Full RangeNOTE:The R204GF-E receiver is recommended for electric powered models only. This is NOT recommended for use with nitro or gas powered models.This receiver is NOT compatible with 2.4GHz FASST or FASSTest systems. It will work with FHSS and T-FHSS transmitters, but transmitter mode will need to be changed to from T-FHSS/FHSS to S-FHSS mode.
Radios / Receivers ,
Store Front Page
$ 48.99
MIP Metric Nut Driver Wrench Set (2) (5.5 & 7.0mm)
The MIP Metric Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space. A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!Features:Includes 5.5mm & 7mm size driversAlloy Steel construction, optimized for weight and balance to give the perfect feel in your handHeat Treated to last a lifetimeNickel Plated for durability and protection against oxidation or corrosionLaser Engraved with the MIP Logo and size of nut driverColor coded band to quickly distinguish one size from another during MAD wrench sessionsMIP Staple Orange Amber handlesShorter length shanks to minimize tool box spaceCompliments the traditional MIP Hex Drive Wrench'sPrecision CNC ground IN-HOUSE from hardened US Tool Steel drill blanks!100% Quality Genuine MIP Made in the USA!
Tools / Wrenches ,
Store Front Page
$ 39.99
MIP 1/10 Turnbuckle Wrench Assortment Bundle (3.25, 3.7 & 4mm)
MIP quality fills the quota for both nut drivers and hex wrenches, but one adjustment tool that’s always overlooked; turnbuckle wrenches! MIP’s turnbuckle wrenches feature an angled tool head and perfectly sized shank to ensure ease of use, and made out of hardened alloy steel to guarantee durability, and size integrity. Each wrench has a color coded ring to quickly differentiate their size. Wrapped around the tool itself is MIP’s all tiny amber handle that perfectly complements MIP’s current tool line and gives your hand plenty of surface area to grab on and adjust turnbuckles effortlessly.Coming in three common sizes including 3.25mm, 3.70mm, and 4.00 mm (AE, Lunsford, TLR, JConcepts, Yokomo, ProTek, etc.) there’s sure to be a size that fits your needs. Start measuring those turnbuckles and order up the last turnbuckle wrench you will ever need, MIP! As always Made 100% in the USA!Features: Tolerances within +/- .001" (~ 0.03 mm)Tiny MIP Amber HandleEngraved SizingAlloy Steel ConstructionColor Coded Size Ring100% Quality made in the USA!
Tools / Wrenches ,
Store Front Page
$ 41.99
MIP Standard Nut Driver Wrench Set (3)
The MIP Standard Nut Driver Wrench Set was built to the same quality standards that have made MIP the go tool for hobbiests for over 30 years. MIP tools are found on pit tables and work benches around the world and are trusted by World Champions and hobbyists alike for their superior quality, longevity, and American construction.MIP nut drivers feature an all steel construct and have been nickel plated to perfection. The nickel plate process boosts the steel hardness level to a whopping 70 plus Rockwell, the same as automotive grade tools! On the surface you will notice these nut drivers are stubbier than traditional drivers, this characteristic allows for a better overall weight balance and reduces tool box space. A special color coded ring and etched sizing on the shank make it easy to know exactly what size nut driver you are grabbing. The drivers also feature a slim hex wall and deep bore to ensure that you are able to get into the tightest of places and not worry about bottoming out on anything in the process!Features:Includes 3/16", 1/4", & 11/32" size driversAlloy Steel construction, optimized for weight and balance to give the perfect feel in your handHeat Treated to last a lifetimeNickel Plated for durability and protection against oxidation or corrosionLaser Engraved with the MIP Logo and size of nut driverColor coded band to quickly distinguish one size from another during MAD wrench sessionsMIP Staple Orange Amber handlesShorter length shanks to minimize tool box spaceCompliments the traditional MIP Hex Drive Wrench'sPrecision CNC ground IN-HOUSE from hardened US Tool Steel drill blanks!100% Quality Genuine MIP Made in the USA!
Tools / Wrenches ,
Store Front Page
$ 58.99
HOBBYSTAR 4PC. NUT DRIVER SET, TINI COATED, SAE
HobbyStar nut-drivers are crafted with a lightweight aluminum handle that features a knurled surface that provides excellent grip on the tool during use. An aluminum plug on the end further protects your hands during use and is also removable allowing you to use the handle for storage of small items. Each driver has the size clearly etched into the handle for easy identification as well as unique lines on the top of each handle for quick ID in any position. The precision cut, hardened ends fit fasteners snugly to avoid stripping out and are coated with a Titanium-Nitrate that not only looks great but protects the tips from wear and corrosion.4-piece set includes 3/16", 1/4" (2 of this popular size) and 11/32" size drivers.
Tools / Wrenches ,
Store Front Page
$ 17.99
